 | |  | | ABOUT US |  |
| | |
Unfinished Furniture Expo is a subsidiary of Rees & Rees, LLC with our locations in Colorado Springs at the foot of beautiful Pikes Peak and Kansas City, Missouri. Prior to that, it was a Tennessee Corporation. In all, Unfinished Furniture Expo has been in the business of providing solid wood heirloom style furniture for over 15 years.
FREQUENTLY ASKED QUESTIONS
WHAT IS THE SHIPPING AMOUNT TO MY ZIP CODE?
To find out the amount of shipping, simply add the item(s) to your cart and fill out the shipping info. There is an "apply" button right under the shipping options. When you hit the "apply" button, your shipping amount will appear up where the item totals are. It will update as you add or subtract items.
WHY BUY UNFINISHED FURNITURE?
Unfinished Furniture Expo offers higher quality wood furniture than finished item stores. Factory finishes can conceal defects or blemishes in the wood. At Unfinished Furniture Expo, we understand the difference and are picky about what we sell. Quality wood furniture purchased today can be used for a lifetime.
Pick any color to match your decor. Finished furniture items from manufacturers can change colors over time. This can make it difficult to match colors when adding new furniture items to your house. At Unfinished Furniture Expo, choosing a matching piece is easy. We carry easy to apply wood stains and clear finishes sold in over 40 different wood tones and colors. We're ready when you're ready to add a new item to your home. It will look just like the previous pieces you've purchased.
At Unfinished Furniture Expo, you have the largest selection to choose from. Buying from finished furniture manufacturers limits you to the styles they offer. When you buy unfinished furniture, you can mix and match different pieces from different manufacturers. Then stain them the same color and they will all match!
For helpful tips on staining your new or restored furniture
visit our new finishing tips area!
DO THE ITEMS NEED ASSEMBLED?
In most cases, yes, the items need assembled. Some stools, stools, benches, etc do come assembled and will be noted in the descriptions. Instructions and all hardware, etc. will be included in the box.
HOW LONG WILL IT TAKE FOR ME TO GET MY MERCHANDISE?
If we have your item(s) in stock, it will take 4-5 business days to reach you via FedEx Ground. You will receive a tracking number by email and you can track your merchandise at www.Fedex.com. Items under 3 pounds may be shipped USPS.
If the item is not in stock, it may take 2-6 weeks to ship.
Please call 1-800-597-3500 to find out availability or email us at info@unfinishedfurnitureexpo.com
IS THERE PARTICLE BOARD IN ANY OF YOUR PRODUCTS?
NO! Our products consist of solid wood and in some cases, pine or birch plywood in certain bookcases, home office and entertainment pieces. These are used for stability reasons. There is absolutely no particle board in our furniture.
HOW TO FINISH YOUR FURNITURE
While you can paint, varnish or finish your furniture in other ways, one of the most commonly used finishing processes is staining and top coating. To get the best results, here are Unfinished Furniture Expo’s wood finishing tips to help you use this method with your wood finishing product.
Preparing the surface with a proven wood finishing supply
Most unfinished pieces need additional fine sanding before finishing to avoid surface fuzz or roughness that will show when the stain is applied. All the furniture from Unfinished Furniture Expo is pre-sanded from the factory, but light sanding is still recommended for a smooth stain application before you use a wood finishing product.
Always sand in the direction of the grain.
Pine, Alder and Parawood should be sanded with medium sandpaper, generally no finer than 180-grit.
If wood fill has been used to cover nicks or holes, be sure the residue has been sanded well. If not, the area around the fill will not stain properly and may have a blotchy look. A nifty trick to spot glue and/or putty marks is using a black light if one is available.
Staining
Stains contain colored pigments that often settle to the bottom of the can and must be thoroughly mixed before application. It may take as much as five minutes to thoroughly dissolve the "mud" so that the color remains consistent as the contents are used up.
To apply stain, Unfinished Furniture Expo recommends using Foam Brushes or a HandiPainter. You can use almost any type of rag (cotton works best) cut approximately 10 inches square (larger ones sometimes get in the way). Stain can be applied in any direction, usually cross-grain first.
Read and follow the directions on each container. The manufacturer knows its products and will tell you how to get the best results.
Do a test "doodle" on the piece first on the back, bottom or other inconspicuous area to check the stain color before proceeding. If the stain looks evenly coated and you like the look, one coat staining is adequate. If the stain is too light or uneven, a second coat of stain may be needed before the topcoat is applied.
Stain one surface at a time, and do the corners and uneven areas first. Do these areas when the applicator has the most stain on it so you can get full penetration. You can then spread the rest on the flat areas.
As you stain each area, wipe with the grain to remove excess stain, then move to another area. As you finish, go back over the entire piece with a clean rag to pick up all excess stain and wipe the surface dry.
Sanding and Top Coat
Most clear topcoats are designed to be wiped on. Unfinished Furniture Expo recommends using a Foam Brush or HandiPainter. Be sure to apply at least three coats of clear finish to all seen areas. Apply at least one coat of clear finish to all unseen surfaces to prevent cracking as the piece continues to dry out over the years.
Allow coating to dry. The surface will feel gummy if not fully dry, and drying time will vary depending on weather conditions and product.
Sand the second dried coating with very fine #400 or #600 wet/dry sandpaper to remove any fuzz. Wipe sanded piece with a tack cloth (tack cloths containing linseed oil are not recommended as they may affect the finish).
Feel the piece with your hands and sand any areas that still seem fuzzy.
Fuzz and dust must be removed before applying final coat. It will not go away until you take care of it.
You are looking for a consistent sheen. If after three coats you have it, and if water protection is not a major concern, the job is done. If you have uneven sheen, apply additional coats, sanding lightly and wiping with a tack cloth between each application. If water resistance is a goal, we recommend four coats of finish on the surface area of concern, usually the top.
Congratulations
You have a beautifully finished piece of furniture you will be proud of for years to come.
Our address:
Unfinished Furniture Expo
1330 Paonia St. Ste D
Colorado Springs, CO 80915
Phone: 800-597-3500
Fax: 816-471-2795
expotex@unfinishedfurnitureexpo.com
|
|
| | |
